Yes, the price is per pair!
The tube connectors are currently out of stock and will be available again in mid February.
These were originally built out and sold by AV123. They are now available in a kit form and can be built out for a fraction of the cost of it in completed form.
At one time we had about 500 pre assembled crossovers for these that were made that were in China. We were giving them away for free with this kit. Once those pre-assembled crossovers we gone then we had to replace them with higher quality US made parts. And we have to charge for those parts. So the price listed now is higher than what you may have seen in our YouTube video that featured this model.
The kits includes everything but the cabinets and uses the M-165-16 woofers and the highly acclaimed T26SG tweeter. Crossover parts are high quality throughout. Crossover must be assembled and are to be point to point wired. The kit also includes binding post cups, wire, screws, solder, and heat shrink.
The X-Statik speakers are 8 ohms and have 91db sensitivity. -3db down is 48Hz for an average room.
The X-Statik is an open baffle hybrid design that allows the two upper mid-bass drivers to operate on an open baffle and utilizing a sealed box design for the lower woofers. This allows an extremely clean and transparent mid-range that is un-matched with boxed speaker designs. The lower woofers produce a tight and well controlled bass with good power handling. This alignment also allows easy blending of the lower range with external sub-woofers.
They are ideal for two channel and home theater applications. Note though that like any open baffle speaker they must be placed at least three feet or more away from the front wall so as not to cause an early reflection.
A Sonicap and Mills resistor upgrade will take clarity and detail levels into the leagues of the cost no object speakers.
The X-Statik can also be improved by upgrading the binding post cups to the Electra Cable Tube Connectors. The tube connectors are the highest quality connectors currently on the market. They offer improved clarity across the board and are extremely easy to install. The tube connector upgrade is $50. The tube connectors are currently out of stock and will be available again in mid February.